TEZI with Linux capabilities
Hello, we are trying to install a custom TEZI image from USB with Toradex Easy Installer. We adjusted image.json in order to autoinstall the image. In gerneral Easy Installer works as expected: USB...
View ArticleHow do I edit an EasyInstaller image?
Hi all. Today I have compiled an image with yocto. My question is simple. How to assemble the EasyInstaller files. I have seen that there is a json database. I could change the name of the rootfs and...
View Article[TEZI] Custom boot
Dear all, We have followed the example described Custom Boot panel on TEZI dedicated web page but boot.scr file doen not seem to work. Our goal is to enabled touchscreen using LVDS channel and USB TS...
View ArticleBuildroot and Toradex Easy Installer for Apalis iMX6
Hi Toradex, I expect to flash whole Apalis iMX6 image generated by Buildroot to the eMMC memory. From other threads, I think that using **Toradex Easy Installer** is the most convenient way for...
View ArticleiMX6ULL PHY Patch In Latest Tezi Image?
Hello, I have been experiencing PHY connectivity issues with the Colibri iMX6ULL. After doing some digging, it appears that this is a result of an error with the KSZ8041's software reset capabilities....
View ArticleiMX6ULL_WB_IT kernel panic
I have a design that uses the iMX6ULL_WB_IT V1.1A SOM. I'm using the procedure outlined on the Toradex website, titled, "Load Toradex Easy Installer From USB OTG" to perform initial programming of the...
View Articlewrapup.sh not running as root
Hello, When I attempt to use the Toradex EZ Installer to load a custom image, I am running into issues with the `wrapup.sh` script not executing certain commands as root. I have copied the code I've...
View ArticleDisplay not working with Toradex Easy Installer TEZI
I currently have a setup, where I update the Apalis Module with Toradex Easy Installer booted from USB Stick with an Image (custom, built with yocto) also residing on this stick. The update procedure...
View ArticleToradex Easy Installer not loading while boot
Hi, Recently bought a Toradex Colibri Evaluation board v3.2 + iMX6ULL module and followed the step by step starting guide provided in the link posted below...
View ArticleProblems flashing image on Apalis iMX8
Hi, We recently acquired the Apalis iMX8QM 4GB and we are in the process of trying to get the Linux Console Image flashed on it. However since there is no Toradex easy installer preinstalled we are now...
View Articledo_image_teziimg fails on next day after timestamp update of source
I am building an image that inherits from core-image. It is set up to create an image for colibri-imx6, but I don't really think it depends on architecture. When I build this image when tmp is empty or...
View ArticleCannot use Toradex Easy Installer with closed device
Hi everyone, I'm performing some secure boot tests on the Toradex Colibri iMX7D 1GB v1.1 module. By following the procedure explained in AN4581, I am able to create a custom signed u-boot and to verify...
View ArticleToradex Easy Installer Error Installing WEC 2013 Image with USB.
Hey guys I was trying to install a older version of the WEC 2013, but I couldn't find it on the TEZI online. So I downloaded it on the USB and inserted while in the TEZI menu. I installed it but It...
View ArticleHow to install older versions of WEC 2013 with Toradex Easy Installer
Hi guys! I'm trying to install a older version of WEC 2013 but I'm having problems to do it with the USB. So I started to find the Json of the old WEC versions In TEZI there is the "feeds" menu that u...
View ArticleToradex easy installer from SD card
I am following the article https://developer.toradex.com/knowledge-base/distro-boot-linux#Example_Loading_Toradex_Easy_Installer_from_an_SD_card to load Toradex Easy Installer on my Colibri iMX7D....
View ArticleCurrent uuu versio is too low, error while using recovery mode from Windows
I try to follow the guide to install easy installer after i played with Boot2QT on an Apalis IMX8 QP. I downloaded easy installer V 2.0b3 on my windows 10 PC. I entered recovery mode successfully as...
View ArticleEasyInstaller - install image from console
Hi On our custom built Colibri carrier board we have no display interface. But we would still like to use the Toradex EasyInstaller if possible. How can we install an image from within EasyInstaller...
View ArticleEasy Installer for IMX8QP 2GB WP V1.0B
I am having trouble using the easy installer for the IMX8QP 2GB WP V1.0B module. I have tried: **Apalis-iMX8_ToradexEasyInstaller_2.0b2-20190716** - This is the version that I have been using for the...
View ArticleInstall "Easy Installer" on iMX6 with update.exe
Hi all, I have a running iMX6 module with WEC7 and want to reset the module to fatory defaults without a extra PC.. How I can programm the Easy Installer with the \\Windows\update.exe direct on the CE?
View ArticleEasy Installer - Combined Installer and Image Package
Is there any way of taking the Toradex Easy Installer and merging our image with it so that both features exist on one SD card, for when we give this to our customers? Ideally, we want to be able to do...
View Article