Hi,
Recently bought a Toradex Colibri Evaluation board v3.2 + iMX6ULL module and followed the step by step starting guide provided in the link posted below
https://developer.toradex.com/getting-started/module-1-from-the-box-to-the-shell/installing-the-operating-system-colibri-evaluation-board?som=colibri-imx6ull&board=colibri-evaluation-board&os=linux
Connected ethernet cable (with dhcp enabled), USB cable Type-B , VGA monitor, USB keyboard & DC power Supply on 20V 2.2A.
After powering on, as mentioned in start guide. I didn't see any toradex easy installer setup on my monitor by default.
So tried recovery mode using SW9(hold) and powering on the eval board, to flash the module with image which i downloaded from official site.
Module not entering recovery mode as I'm not seeing any led indication as per the video provided in this link(https://developer.toradex.com/knowledge-base/imx-recovery-mode#colibri-imx6ull).
Instead of that my RESET OUT# Led is always on. what is the issue with my board?
Kindly help me out with this issue.
↧