Greetings,
My team and I plan on getting our hands on a Toradex SOM (most likely an Apalis iMX8X) and do Yocto development on it. We went through the [hands-on document][1] for building Yocto images, and arrived at the part where we are told to follow the procedure documented in the [Toradex Easy Installer][2] article for image installation, and have a few questions in terms of how this would impact development work.
Is TEZI still available after we flash a custom Yocto image onto the board? Based on our understanding of the documented procedures, it is possible that we will have to reinstall TEZI via USB OTG, if we plan to flash another custom image after the first flash. In other words, does flashing via TEZI cause the preinstalled TEZI itself to be wiped from the board?
We foresee ourselves being in the same situation as this user in [this thread][3], where the custom board we will be developing on may not include a USB OTG to load TEZI. We haven't looked into other flashing methods yet, since TEZI seems to be the official way to do it. Would appreciate any advice we can get.
Many thanks, YH.
[1]: https://developer.toradex.com/knowledge-base/board-support-package/openembedded-core
[2]: https://developer.toradex.com/software/toradex-easy-installer#2-load-toradex-easy-installer
[3]: https://www.toradex.com/community/questions/34871/how-to-reinstall-toradex-easy-installer.html
↧